Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In&Above Ground Hi-Flo

Description

Description
About this item
POWERFUL PUMP
-- This pool pump is quiped With IP55 1100W electric motor,high efficiency Impeller maximize flow and reduce noise,offers dependable performance, energy efficiency and quiet operation.Copper wire motor provides not only a more efficient, stable and safe operation, but also has a longer service life compared to ordinary motors. The powerful flow can achieve 6500 GPH and the maximum head lift can reach 51 ft.
STURDY CONSTRUCTION
-- This 1.5HP Pool Pump is featured with commercial-grade reinforced thermoplastic shell and stainless steel motor housing,provides you with high-performance suction power and optimal flow.Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation system .Ideal for all-weather performance and quiet operation.The 100% drip proof, heat-resistant seal offers a long motor life.
WIDE APPLICATIONS
-- The Single-Speed 1.5 HP Pool Pump is designed specifically for ABOVE GROUND and INGROUND pools. Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation system .Ideal for all-weather performance and quiet operation. Designed a voltage-switch-button at the bottom of the motor, Compatible with 115V and 230V Dual Voltage, meet all your needs.
HUMANIZED DESIGN
-- Equipped with a drain plug on the bottom which is easy for drainage and avoids water accumulation during winter,provides easy maintenance of pump. Extra-large filter basket with clear cover keeps pool maintenance to a minimum.Transparent cover helps to judge if the basket needs clean or not;The pool pump has built-in thermal overload protection and provides pressure protection,can withstand liquid temperature up to 140℉.
Note:
Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation.
Problem Description:
1,
The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out.
Causes:
The pump head is not filled with water, causing the pump to run without water.
During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water
Solution:
When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes.
Before pumping, the pump head should be filled with water.
Inlet and outlet joints wrapped around the raw material tape, beware of leaks.
Tightening when installing the inlet and outlet, beware of leaks.
The pump head transparent cover is tightened to prevent air leakage and water seepage
2,Pump motor trip
Causes:
1,The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn.
2,The pump prevents the inlet from entering the water and burns the motor
3,There is Water in The Pump
Causes:
Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal.
4,The Pump stop working suddenly
Causes:
Our company's products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working.
Solution:
Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller.
Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused.
The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter.
Specification
Type : Pool Pump
Dual voltage : 110-120V/220V-240V
Power : 1100w
Horsepower : 1.5 HP
Speed : 3450 RPM
Max. Flow : 6500 GPH
Max. Temp : 104 Degree Fahrenheit (40 Degree Celsius)
Frequency : 60HZ
Qmax : 410 L/min
Hmax : 15.5 Meter
Power Cord : 59"
Certification : CSA and ETL
In The Box
1.5HP Dual voltage Swimming Pool Pump : 1
Manual : 1
Features
Brand new
This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety
High performance, energy saving motor with stainless steel shaft could stand wear and tear
Thermally protected motor for greater protection and longevity
Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning
Easy start up fill pump with water upon first use to prevent motor from overheating
Transparent cover helps to judge if the basket needs clean or not
Massive strainer basket holds extra capacity
Suggested Installation: 24"-26" sand filter and above-ground pools
304 grade stainless steel motor shaft,Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation
Strainer basket to minimize how often you have to empty it
See-through strainer cover for a fast and easy check of the strainer
Easy-thread strainer housing ring makes cover removal extremely easy
Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic
Convenient drain plug makes winter maintenance easy
High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5" NPT (fit for 1.5" male threaded adapter)
Delivery
We have Two warehouses located in CA, and NJ, and the item will be shipped from one of them according to your location, and only to eBay ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product.
SHIPPING
1. We have Two warehouses located in CA, and NJ, and the item will be shipped from one of them, and only to eBay ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product.
2. It is beyond our ability to change the address after we ship your item.
3. Orders placed at weekend will be shipped within 2 days.
4. USPS: 3-9 business days. | UPS: 2-6 business days. | FedEx: 2-6 business days.
5. We only ship to the 48 states, and we do not ship to FPO or APO addresses.
RETURN
We accept returns. Please contact our customer service team immediately if: 1.You changed your mind and wish to request a return.
2.Your product was damaged during transit.
All returns must be directed through Customer Service. Please do not return or post items before obtaining instructions from us. If you do, there is a risk that your returned item may not be identifiable and accepted. Applicable freight fees and a 10% re-stocking fee will be deducted from your refund in cases where you changed your mind about your purchase and wish to return the product. This also applies to orders cancelled while in transit.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
We will require a picture of the damaged part for verification.
The buyer will be liable for the shipping costs associated with warranty claim.
WARRANTY
For your peace of mind, this product comes with a 2-year warranty. We value our customers and wish to make your purchase experience as enjoyable as possible. If something goes wrong with your product, please do not hesitate to contact us for assistance.
Please contact us through eBay and include the original purchase information (i.e. your name , address, email and purchase receipt number).
PAYMENT
We accept Paypal payment only.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.